About Feet to Inches Converter
This converter turns feet into inches. One foot is 12 inches. It is free, needs no sign-up and runs in your browser, so nothing you enter is uploaded.
To convert by hand, multiply the number of feet by 12. For example, 10 ft × 12 = 120 in. To go back, multiply inches by 0.083333333. For a rough mental estimate, multiply by about 12, which is off by about 0.0 percent.
One foot is 0.3048 m. Every length unit here is defined from the meter: 1 inch is exactly 25.4 mm, 1 foot is exactly 0.3048 m, 1 mile is exactly 1,609.344 m and 1 nautical mile is exactly 1,852 m. The factor on this page is therefore exact, and only the displayed digits are rounded.
How to use Feet to Inches Converter
- Choose a group such as Length or Temperature from the Quantity picker. It opens on a worked conversion.
- Type the value you want to convert in the From box. Decimals and negative numbers are fine.
- Pick the unit you have in the From list and the unit you want in the To list. The swap button reverses the pair.
- Read the result in the result card, and use the copy button to put it on your clipboard.
- Set Precision to Auto, or to a fixed number of decimals from 0 to 10, if you need a specific rounding.
- Check the formula line and the chart of common values under the result when you want to see how the number was reached.
Features
- 102 units in 15 groups, from nanometers and light-years to square miles, and from bits to tebibytes. It includes milligrams, UK gallons and pints, cubic meters, feet and inches, degrees and radians, hertz and rpm, and bits per second to MB/s.
- Results update as you type, with a swap button to reverse the pair.
- Precision control: Auto (up to 8 significant digits) or 0 to 10 fixed decimals.
- A copy button for the result.
- The formula and the factor in both directions, shown under the result.
- A chart of common values (1, 2, 5, 10, 20, 25, 50, 75, 100, 250, 500 and 1,000) for the pair you chose.
- Temperature handled with proper offset formulas, plus the UK gas mark oven table.
- Fuel economy handled as an inverse, so US and UK miles per gallon and liters per 100 km convert correctly.
- Bangladesh land units: decimal (shotangsho), katha and bigha.
- Both decimal data units (KB, MB, GB, TB) and binary ones (KiB, MiB, GiB, TiB), clearly labeled.
Feet to inches formula
To convert feet to inches, multiply the value by 12.
To go the other way, multiply inches by 0.083333333, which is the same as dividing by 12.
in = ft × 12Worked examples
10 ft gives 120 in
10 × 12 = 120
15 ft gives 180 in
15 × 12 = 180
100 ft gives 1,200 in
100 × 12 = 1,200
Feet to inches conversion chart
| Feet (ft) | Inches (in) |
|---|---|
| 1 | 12 |
| 2 | 24 |
| 3 | 36 |
| 4 | 48 |
| 5 | 60 |
| 6 | 72 |
| 7 | 84 |
| 8 | 96 |
| 9 | 108 |
| 10 | 120 |
| 12 | 144 |
| 15 | 180 |
| 20 | 240 |
| 25 | 300 |
| 30 | 360 |
| 50 | 600 |
| 100 | 1,200 |
| 500 | 6,000 |
| 1,000 | 12,000 |
Privacy: how it works
- Every conversion is calculated by code running in your browser tab. The values you type are never sent to Ulkaa or anyone else, and nothing is stored.
- There is no account and no sign-up for this tool, and it costs nothing to use.
Tips
- Use the swap button instead of retyping when you need the reverse conversion.
- For a quick mental check, round the factor: 1 inch is about 2.5 cm, 1 kg is about 2.2 lbs, 1 mile is about 1.6 km.
- Set Precision to 2 decimals for cooking, shopping and travel, and to 6 or more for engineering work.
- Check whether a figure uses US or imperial units before converting volumes, gallons and miles per gallon.
- For land, convert for a rough size, then confirm the area from the deed or survey record.
Frequently asked questions
Is it really free?
Yes. There is no price, no trial and no credit card. Ulkaa Tool does the work with your own device, so there is no server bill to pass on to you.
Do I need an account?
No. There is no sign-up and no login. Open the page and use it. An Ulkaa account is not needed for anything on this tool.
Does it run in my browser?
Yes. Your values are processed by code running in your browser tab, on your own device.
Is my data uploaded?
No. Your values are never sent to Ulkaa or to anyone else. You can check this yourself by watching the Network tab in your browser developer tools while you use the tool.
How many inches are in a foot?
One foot is 12 inches.
How many feet are in an inch?
One inch is 0.0833333 feet.
How do I convert feet to inches by hand?
Multiply the value in feet by 12. For example, 10 ft is 120 in. To reverse it, divide by 12.
Is the foot to inch factor exact?
Yes. Length units are defined from the meter, and 1 foot is exactly 0.3048 m. The digits you see on this page are rounded for display only.
More Unit Converter pages
- Unit ConverterConvert length, weight, temperature, volume, area, angle, speed, time, frequency, data and more, including Bangladesh land units.
- Kilometers to Miles ConverterConvert kilometers (km) to miles (mi).
- Miles to Kilometers ConverterConvert miles (mi) to kilometers (km).
- Centimeters to Inches ConverterConvert centimeters (cm) to inches (in).
- Inches to Centimeters ConverterConvert inches (in) to centimeters (cm).
- Feet to Meters ConverterConvert feet (ft) to meters (m).
- Meters to Feet ConverterConvert meters (m) to feet (ft).
- Feet to Centimeters ConverterConvert feet (ft) to centimeters (cm).
- Centimeters to Feet ConverterConvert centimeters (cm) to feet (ft).
- Inches to Millimeters ConverterConvert inches (in) to millimeters (mm).
- Millimeters to Inches ConverterConvert millimeters (mm) to inches (in).
- Meters to Yards ConverterConvert meters (m) to yards (yd).
- Yards to Meters ConverterConvert yards (yd) to meters (m).